Submitted by Name: rich From: brooklyn ny E-mail: Contact
Comments: great walk through, thanks for the help.
Admin reply: You are welcome.
Added: May 1, 2008
Submitted by Name: Tommy From: Denver
Comments: This site was far more informative than the truck repair manuals I have for the vehicle. I haven't used the information yet, but plan to this weekend. Please keep up the good work.
Admin reply: Thanks for the nice comments.
Added: April 30, 2008
Submitted by Name: Justin From: Mesa, AZ
Comments: This is a great site. I used it to teach the parts people at ford what I needed.
Thanks a lot.
Admin reply: You are welcome.
Added: April 23, 2008
Submitted by Name: Jason From: Kansas E-mail: Contact
Comments: This is a great informational site. Just AWSOME++++. Thank you for spending the time to do all these great write-ups. Have you ever done R2 on Inner axle seals, I know seems pretty straight forward but always nice to have a good write-up..
Thanks again for all your hard work on this site.
Admin reply: No on the inner axle seals (not yet). Thanks for your nice comments. Glad I could help.
Added: April 20, 2008
Submitted by Name: Bob From: SW Michigan E-mail: Contact
Comments: Your webpage was a gold mine of information! I saved SO much money doing the job myself, and I am sure it has helped many others as well. Thank You!
Admin reply: You are welcome. Glad you saved some money. Thanks for taking the time to leave a comment.
Added: April 17, 2008
Submitted by Name: DAN From: Kingston ont Canada E-mail: Contact
Comments: thanx for the info. i had to email your site to my mechanic(scary eh) new ball joints work great and so does ther new seal tool. thanx again
Admin reply: That's funny. Glad to help. Thanks for signing my guest book. I appreciate the feedback!
Added: April 1, 2008
Submitted by Name: Brian From: West Milton Ohio E-mail: Contact
Comments: The write up on ball joints gave me the confidence to do it myself. Saved me 800 bucks over have a shop do it. I don't know how you would get the axle seal on with-out the special tool. Thanks a million for taking all the time and effort you have put into this site.
Admin reply: Glad to help Brian
Added: February 14, 2008
Submitted by Name: Bruce From: New York{Catskills} E-mail: Contact
Comments: Great write up on the axle seal tool.Thanks alot.
Admin reply: Thanks
Added: February 10, 2008
Submitted by Name: PaysonPSD From: Payson, AZ
Comments: Thanks for sharing this GREAT Info.
Admin reply: Glad to help, thanks for stopping by.
Added: January 29, 2008
Submitted by Name: Tom From: Calgary, AB, Canada
Comments: I had just about given up on replacing the ball joints on my Superduty when I hit into the axle seal and $300 special tool required. Your description for building my own tool saved me many $. Your description of the whole replacement process was also excellent. Thanks a bunch - keep up the great work.
Admin reply: I am very glad the write-up helped. I had the same problem when it came to the axle seal tool. Hence the write-up. Thanks for your comments.
Name: rich
From: brooklyn ny
E-mail: Contact
great walk through, thanks for the help.
Admin reply: You are welcome.