Submitted by Name: Chris From: Albuquerque E-mail: Contact
Comments: Thanks for the great site. I always refer to this site when I need to do any work, so easy to use. I own the service manuals for my 2000 for F350 and don't even need to use them. The information on this site is very accurate and easy to access. Thanks much!!!!!!!!
Admin reply: . Thanks Chris! I appreciate the positive feedback.
Jerry
Added: June 6, 2019
Submitted by Name: Van Sullivan From: Matthews, N.C. E-mail: Contact
Comments: Thank you for a clear, concise, and straight to the point website. No attitude nor bullshit involved. It is very refreshing. Thank you again, Facebook could use your help !
Admin reply: Thanks, Van. I appreciate your comment. I do try to keep it kind of "just the facts Jack" and try to keep the fluff to a minimum.
Thanks again.
Jerry
Added: March 26, 2019
Submitted by Name: Red Miller From: South Florida E-mail: Contact
Comments: Thank you! Thank you! Thank you! I don't know what I would have done without your write-ups. Thank you! Thank you! Thank you!
Admin reply: Thanks, Red. I appreciate the kind words.
Added: February 25, 2019
Submitted by Name: Ed Greany From: The Toilet Paper Oil Filter Company, Pinon Hills, CA E-mail: Contact
Comments: Beautiful installation.
Added: February 24, 2019
Submitted by Name: LVM From: CT
Comments: Great site, I visit often.
Added: June 26, 2018
Submitted by Name: ERICH From: SOUTHERN MASS E-mail: Contact
Comments: LIKE THE SITE , IM IN THE PROCESS OF GETTING RID OF MY DEATH WOBBLE AND NEEDED A TORQUE SPEC FOR TORQUE ARM BOLTS I THUMBED THRU AND FOUND A LOT OF GOOD INFO HERE.THIS WILL KEEP MY 2000 EX 7.3 RUMBLING ALONG.
Added: June 11, 2018
Submitted by Name: Gary Witthans From: Apple Valley CA E-mail: Contact
Comments: Just finished doing the ball joints on my 04 F-350 Super Duty. Your step by step procedure with great photos took an slightly intimidating project and made it do able. Thanks so much for your time and efforts to share this with others. Gary
Added: April 24, 2018
Submitted by Name: LW Beam From: Concord, NC E-mail: Contact
Comments: Fantastic Resource, thank you for putting it out there; Owner of a 2002 F250 Super Duty 4x4 Crew Cab. 111,000 miles.
Question; I'm fixing to replace my ball joints, what manufacture do you recommend? I have heard Moog or Detroit Axle are good..... your thoughts?
I'm also interested in your bypass oil filter setup.
Keep up the great work.
Added: April 20, 2018
Submitted by Name: Rich From: Utah E-mail: Contact
Comments: Great resource for my 02 4WD 7.3 Excursion Limited w/125K. I do most of the work myself and own the Ford service manuals...but this is a much handier reference. Many thanks!
Added: April 18, 2018
Submitted by Name: Jason From: Texas E-mail: Contact
Comments: You may have seen these, but go to ebay and search "superduty center console cupholder". It's a cupholder that attaches to the front of the console, it's pricey, but it is worth it!
Name: Chris
From: Albuquerque
E-mail: Contact
Thanks for the great site. I always refer to this site when I need to do any work, so easy to use. I own the service manuals for my 2000 for F350 and don't even need to use them. The information on this site is very accurate and easy to access. Thanks much!!!!!!!!
Admin reply: .
Thanks Chris! I appreciate the positive feedback.
Jerry